上海11选5

  • 电话:18953193603
  • 手机:15165988860
  • 网址:http://www.sun-tm.com
  • 总部地址:济南市凤凰山路
  • 分部地址:济南市五区服务点
    鱼缸定制选材需要注意以下几点
    来源:http://www.sun-tm.com  2020-05-13 14:25:29

    鱼缸定做的细节问题一定要注意好了!我们接下来一起看看济南鱼缸定做为我们总结的几条:
    We must pay attention to the details of customized fish tank. Let's take a look at the Jinan fish tank customized for our summary of a few:
    底柜材质:一般定制底柜材质分为2种:合金底柜,实木底柜。
    Bottom cabinet material: generally customized bottom cabinet material is divided into two kinds: alloy bottom cabinet, solid wood bottom cabinet.
    合金底柜,具有现代感,一般都是采用黑色亚克力板作为柜板,具有代表性的就是:彩蝶鱼缸;
    Alloy bottom cabinet, with a modern sense, generally using black acrylic board as the cabinet board, representative is: butterfly fish tank;
    实木底柜,更具自然性,一般都是方木支撑,配合百叶门使用,具有代表性的就是:水猎人鱼缸;
    Solid wood bottom cabinet, more natural, is generally supported by square wood, with the use of shutters, the representative is: water Hunter fish tank;
    这个因人而异,主要看自己家庭的装修风格,和哪个底柜材质比较搭配。
    This is different from person to person, mainly depending on the decoration style of their family, and which cabinet material match.
    溢流方式:一般定制溢流方式分为3种:四角溢流,三角溢流、三重溢流。
    Overflow modes: There are three kinds of customized overflow modes: quadrangular overflow, triangular overflow and triple overflow.
    四角溢流,溢流区采用四方形,节省空间,但正面观赏时,有明显边棱影响整体性;(很多朋友反馈说,四角溢流有死角,因本人没用过四角,不做评价)
    Four corners overflow, overflow area using square, save space, but when viewing positively, there are obvious edges affecting the integrity; (Many friends feedback that there are dead corners in the four corners overflow, because I have not used four corners, do not evaluate)
    三角溢流,溢流区采用三角形,正面观赏时,溢流区与鱼缸融为一体,不影响观赏性,但占用了一部分鱼缸的空间,形成了浪费;
    Triangular overflow, overflow area using triangle, positive viewing, overflow area and aquarium into one, does not affect the ornamental, but occupies part of the aquarium space, resulting in waste;
    三重溢流,采用亚克力材质制作而成,使用初期很美观,但一段时间以后,溢流管内壁形成褐藻之后,影响美观。

    Triple overflow, made of acrylic material, is very beautiful at the beginning of use, but after a period of time, brown algae formed on the inner wall of the overflow pipe, which affects the beauty。

    济南鱼缸定做

    底滤分缸:底滤缸一般最少为3个,也有4个以上的,但原理都大同小异。
    Bottom filter cylinder: Bottom filter cylinder is generally at least 3, there are more than 4, but the principle is much the same.
    以三格底滤缸为例:
    Take three bottom filter cylinders as an example:
    第一缸主要进行物理过滤,由干湿分离+第一格滤材组成;
    The first cylinder mainly carries out physical filtration, consisting of dry-wet separation and the first filter material.
    第二缸主要进行生化过滤,由第二格滤材组成;
    The second cylinder mainly carries out biochemical filtration, consisting of the second filter material.
    第三缸主要为设备放置,潜水泵和加热棒等设备的放置。
    The third cylinder is mainly for equipment placement, submersible pumps and heating rods and other equipment placement.
    一般建议将第二格做到最大化,即第一格和第三格尽量压缩空间,因为第一格物理过滤主要是由过滤棉的层数决定的,和空间关系不大,而最后一格主要是放置设备用的,空间过大可能造成浪费。
    Generally, it is suggested to maximize the second lattice, that is, the first and third lattices compress the space as much as possible, because the physical filtering of the first lattice is mainly determined by the number of layers of filter cotton, and has little relation to space, while the last lattice is mainly used for placing equipment, which may cause waste if the space is too large.
    鱼缸胶边:胶边一般没有人会特别在意,但是这也是鱼缸工艺的重要因素。
    Fish tank rubber edge: Generally no one will pay special attention to rubber edge, but this is also an important factor in fish tank technology.
    如果使用超白材质鱼缸,要选择透明的玻璃胶,实现“无胶边”,而千万不能使用黑色玻璃胶,显得鱼缸十分厚重。
    If the fish tank is made of super white material, transparent glass glue should be chosen to achieve "no glue edge", and black glass glue should not be used, which makes the fish tank very thick.
     


安徽快3走势图 安徽快3 上海11选5 上海11选5走势图 上海11选5 上海11选5 21点 上海11选5走势图